In order to improve the entertainment effect of KTV boxes, many KTV boxes have set up gorgeous small dance floors, three-dimensional luxurious lighting equipment, and automatically controlled by computers, providing new entertainment projects for dining groups. The dance floor design of KTV is concentrated in the box near or in the middle of the screen. Generally, it is not located at the entrance. It is convenient for customers to eat and entertain without affecting the service work of the waiter.

1. Dance floor design

The design of the dance floor of the KTV box should be able to enhance the entertainment effect, create an atmosphere, and attract guests. At the same time, the design of the dance floor should also follow the principle of not only convenient for guests to entertain and allow guests to eat and drink. The dance floor design should be consistent with the size of the KTV box and the capacity of the number of people. Generally small KTV boxes, such as a box that can accommodate 2-4 people, the dance floor is generally 1 or 1.5 square meters square table or pool surface, which can accommodate 10 people The dance floor of the above large KTV boxes should be larger. Due to the limited space of KTV, the dance floor design adopts two methods:

(1) Conceptual dance floor. That is, when decorating the ground, use specific methods to make conceptual square and circular dance floors, such as using special colors or installing variable colored lights under the floor. The design of the conceptual dance floor is a flat surface that does not hinder the room for other uses.

(2) Special materials are used to design a dedicated dance floor. The dance floor may be higher or lower than the room level, and the floor is usually made of copper or glass.

In short, the design of the dance floor in the KTV box should achieve the purpose of direct communication between customers and creating a common entertainment atmosphere. In addition to the general dance floor design requirements, the dance floor set in the KTV box must also have an area consistent with the size of the KTV box. At the same time, it must be well ventilated and sanitary equipment must meet the standards set by the health department. The setting of safety equipment is also very important. The sign light of the safety door should be clearly visible, and emergency lighting equipment should be provided.

2. Dance floor lighting effects

　　Lighting design, as a part of the dance floor design, is used to describe and render the stage. It mainly uses the light and shade, color or light distribution to create various combinations of light and enhance the effect of the dance floor.

KTV dance floor lighting must first consider the basic lighting in the KTV, and at the same time, fully consider the unique atmosphere of KTv, in order to achieve the most ideal effect. There are many types of lights available for KTV dance floor. Generally, the following types are commonly used:

(1) Beam lamp, this is a relatively new type of lighting fixture, which is characterized by small size, strong beam and good condensing effect. When you use it, you can adjust the color according to your needs. Through the control of the dimmer, the brightness can be changed continuously to achieve the strong effect of the contrast of the light and color of the venue.
(2) Single flying saucer revolving lamp, this kind of lamp adopts different azimuth multi-motor control and glass coloring glue technology, and its quality and effect are excellent.
(3) Scanning lights, there are several types of scanning lights, such as single head, multi head, etc., using strong colored beams to scan the whole field in turn, creating an excited and psychedelic feeling.
(4) Cosmic revolving lights. There are many types of cosmic revolving lights, such as round, polygonal, olive, etc. This kind of light is automatically controlled by a motor to spread colored light spots to the entire box, which is extremely colorful.
(5) Voice-activated strip-shaped gypsophila. This kind of lamp has novel design, reasonable mechanical structure and sensitive voice control. The light can change, flash and rotate with the rhythm of music. If glass colored glue is used instead of colored paper, the lamps can have the advantages of bright colors, good transparency, high temperature resistance, resistance to aging, and low cost.
(6) Color turntable lights, that is, a turntable driven by a reversible motor is installed in front of the 2000-watt spotlight, and the turntable is covered with light colored paper of various colors. When using this kind of lamps, the light color in the venue will constantly change, which plays a very good role in rendering the atmosphere of the dance floor.

In addition, the sound-controlled color lamps can be decorated on the ceiling, window edge, etc. in the KTV to add the atmosphere of the dance floor. Or install various patterns of plexiglass floor on the floor of the dance floor, and install voice-activated colored lights under the floor, which flashes with the change of the music rhythm, and the effect is very good. If the space can be matched, neon lights, laser lights, etc. can also be installed. In short, the KTV dance floor lighting styles are different and should be selected according to the size of the KTV space and functional needs. It can be elegant and quiet, or gorgeous and warm.