What is a stage light?
Classification:
summary description]
The stage light is a high-power spotlight, which is composed of a convex lens and a light source. Mainly use light to highlight the actor or protagonist when the scene is dark, and fill the light for the actor. The stage chase light can change a variety of different colors, and the chase light can produce different patterns. The application of chasing lights is very wide, such as stage plays, wedding ceremonies, opening ceremonies, closing ceremonies and other occasions are commonly used lamps.
What is a stage light?
StageThe light is a light.BigThe power spot lamp is composed of a convex lens and a light source. mainly inNowThe field is dark with light to highlight the actor orprotagonist, to fill the light of the actors.StageThe chasing light can change a variety of different colors, and the chasing light can produce different patterns. Application of chase lightvery broadFor example, stage plays, wedding ceremonies, opening ceremonies, closing ceremonies and other occasions are common.With lamps and lanterns.
Matters needing attention and use method of 1. chasing light
1Before the lamp is officially used, the test machine must be started, the power supply must be turned on, and there must be5Minute preheating time, can make the lighting effect to achieve the best, because now commonly used built-in transformer chase light, insufficient voltage will cause the chase light self-check for a long time and can not afford to car. So as not to cause unprepared.
22. The starting power of the chasing light should be higher than the normal working power. Therefore, the power supply should be selected separately.2.5Cables above the square are directly connected from the electric well by an on-site electrician. To prevent the power overload trip, more serious wire debt caused by excessive fire.
33. Placement and height requirements of the chasing light. If two lamps, one stand on the side of the stage is used when entering. The other stand is used when entering the field facing the stage. If there is a third chasing light, it should be placed in parallel with the second chasing light, and each occupying a corner of the site. It is advisable that there is no building in front of the light. Height of rack lamp2.5More than meters, the lamp head is not direct to the human eye. On-site operation bracket should be on the table, but it must be stable, and the chasing lamp rotates left and right without scratching.
4After the light is turned off, at least15Minutes of cooling time can be used again; If it is turned off and turned on immediately, it is likely to cause the light source to be off and cause the bulb to burn out. If you need to replace the bulb, you have to wait for the machine to cool down. Do not touch the glass in the middle of the bulb. Press to install firmly. The vent of the lamp body should be unblocked so as not to affect the heat dissipation.
5The chasing light is a high-end equipment at the wedding scene. The equipment is expensive, large in size, heavy in weight, and complicated to operate, so there must be a special person to take care of it. During transportation, you should handle it with care, minimize vibration, and avoid causing poor line contact, resulting in abnormal operation. The chasing light has a special turnover box.
2. light effect
The chasing light is mostly used on the stage, mainly used when it is necessary to highlight the actor, for example, when the surrounding scene is dark, a beam of light is hit on the actor and moves with the actor. This kind of light is the effect of chasing the light.
In the wedding ceremony in recent years, the light beam is shone on the couple through the chasing light, which makes the romantic and warm atmosphere more rich, which is also a big display of the effect of chasing light.Often within the industrySay yes"A hard and solid aperture" in the performance area with the actor'sChasing to move, hence the name chasing light.

Previous Page
Next Page
Previous Page
Next Page
More Cases