Code for design of song and dance hall
Classification:
summary description]
Song and dance hall is a high-level comprehensive cultural product. It is a hierarchical system, in which each subsystem is composed of various elements, and they cross into a network, that is, the structure of the handover relationship between the elements and the subsystems. Use the technology and skills of architectural art interior design to optimize and stabilize it to produce the overall effect of the system.
Song and dance hall is a high-level comprehensive cultural product. It is a hierarchical system, in which each subsystem is composed of various elements, and they cross into a network, that is, the structure of the handover relationship between the elements and the subsystems. Use the technology and skills of architectural art interior design to optimize and stabilize it to produce the overall effect of the system. Sound reinforcement systems, architectural acoustics, lighting systems, indoor technology, etc. are all components of the elements and subsystems of the dance hall as a system engineering. They cross and intertwine with each other at different levels, each with its own characteristics and contradictory to each other. Therefore, the elements and subsystems must be carefully analyzed and carefully considered in order to untie the nodes of their cross-networks, unify the contradictions, achieve overall effects and meet the requirements of various laws and regulations. Building sound design should provide a good sound field, in order to give full play to the performance of the sound reinforcement system and its equipment, and provide sound absorption materials and components of the practice and layout and interior design to provide space to create the prototype; also provide good lighting conditions for the lighting system, to play its artistic effect, is the basis of the artistic image of the dance hall. Similarly, interior design can provide a suitable location for speakers and a workplace for tuning, and it is also an organizer that unifies various technologies to create a beautiful environment for viewing and listening. However, in practice, they are often independent and independent. The designers of sound reinforcement system believe that as long as there is good equipment and system design, there will be good sound reinforcement effect. The designers of sound construction only consider how to ensure the requirements of reverberation time and provide the design of acoustic materials and components. Interior designers believe that scientific and technological personnel do not understand art, create behind closed doors, and finally provide space for scientific and technological personnel to think of beauty, let them place various equipment and handle them in this space; accordingly, the scientific and technological personnel also think that they do not understand the architectural art and ignore it. As everyone knows, the optimization of their own system is not equal to the overall optimization, but often has a negative effect on the contrary. Therefore, the designers of the song and dance hall should recognize that the song and dance hall is a systematic project, and the sound reinforcement system, architectural acoustics, lighting system, interior design, etc., is a subsystem of the system. As a sound reinforcement system designers should take the relevant science and technology and art as a body of knowledge, but also a way of thinking, in order to explore a higher level of science and technology and art of a variety of intertwined creation is both scientific, and the overall effect of art, in order to obtain a good sound reinforcement effect.
The biggest characteristics of the sound field of the song and dance hall are as follows: first, it has a large area of smooth surface dance floor, which is a strong sound reflection surface; Secondly, there is a light stand on the ceiling of the upper part of the dance floor, which concentrates a large number of technical equipment, artistic lighting lamps, performance lighting lamps, sound and video equipment, etc. Therefore, the dance floor is the center of vision and listening, which is the heart of the dance hall. The third is that the dance floor and the stage are in the same space, and the composed space (sound field) represents the sound quality characteristics of the dance hall: the volume is large, the sound level should be 95dB, with a margin of 6 ~ 10dB, and the sound pressure level for playing disco music should be 110dB, with a margin of 10dB. In addition, the mixing of sound reinforcement and sound reception is easy to cause howling, so the sound field conditions of the song and dance hall are very complicated, and its acoustic design is sometimes more difficult than that of the theater. However, it has not attracted sufficient attention, and even the sound reinforcement system design workers have not given due attention. The ratio of the height, width and length of the room is the condition that directly affects the quality of the sound field. When the ratio is appropriate, the resonance frequency of the room is evenly distributed. The "acoustics" is usually deduced as the "Golden Law", that is, 0.618:1:1.618. It is well known that the "Golden Law" is also one of the ratios of auditorium beauty, it is also for the scientific meaning of "isomorphism" in architecture art, which means that some objects look very different from the outside, while the structural forms of their internal composition, or the forms of connection between their constituent things, are the same, which can be transformed into each other through some transformation, and the 0.618 ("golden law") is the value of their transformation. The key to the proportion is height. The height of the dance hall should be more than 5 meters. If it is short, the room lacks low-frequency resonance, which will affect the sound quality in the hall. In addition, the scaffolding on the upper part of the dance floor is the place where effect lamps, performance lamps, loudspeaker sets and video equipment for dancing are installed, so the grating has a certain height, and the top grating at that place is required to have a certain height, only a good illumination angle can achieve good lighting artistic effect and appropriate sound coverage. Because the strong reflection on the dance floor surface has a great influence on the sound quality in the hall, sound-absorbing materials with sufficient thickness must be arranged on the top grid of the grid frame. Therefore, the height of the hall and its proportion are important factors that determine the sound quality and lighting in the hall. If the space in the hall is limited and cannot reach this ratio, at least the empty sound enclosed by the dance floor and stage must conform to this ratio. Arc surface and two parallel surfaces should be avoided, they will produce sound quality defects, especially on this surface with mirror or hard material to do the finishing, it is more harmful, if from the modeling requirements must be used, the surface should be acoustic treatment.
In addition to the decoration of the dance hall to obtain beautiful visual effects to meet the requirements of the standard. Reverberation time is a function of volume, generally can take about 1 second. Most of the dance halls now use a large number of carpets, or decorative cloth as a surface decoration, the internal placement of plastic or ultra-fine glass wool, the so-called "soft bag" processing. This approach will make the high-frequency sound absorption too much, so that the reverberation time in the high frequency is short, so the sound in the hall is not bright enough, poor clarity, not gorgeous and no color. There are also a large number of methods used in the external use of plywood or five plywood cladding, generally with small nails consolidation; Some are also covered with a layer of "soft bag", which makes the low-frequency sound in the hall absorbed in large quantities, making the sound in the hall hard, inelastic and unbalanced. Due to the lack of strict acoustic design and the single sound-absorbing materials and components in the hall, the sound of a certain frequency is absorbed too much and distorted, thus it is difficult to adjust even if the room equalizer is used, and the phenomenon that the sound cannot be pulled down even when it is adjusted to the top often occurs during the adjustment process, resulting in the "taste change" of the sound of the frequency at this point. At the same time, the transmission frequency effect is very poor.
The stage is equipped with loudspeakers. Both the combined loudspeakers and the woofer shall be placed on the structural ground or on a solid support (the woofer shall be placed on the ground); The suspension bracket and fulcrum of the suspension speaker shall be firm and shall not produce vibration, otherwise the sound quality will deteriorate. Wood decoration methods often produce plate vibration noise due to careless construction and weak DingTalk; poor consideration of the light hanger will also produce 40~80Hz low frequency resonance. This vibration noise in the room equalizer debugging, in the spectrum of a peak in the false image. The sound is weakened and the peak disappears; but it is not linear, so it is difficult to debug. There should be no interference between KTV rooms and between KTV rooms and the hall, including the total sound insulation capacity of the top grid and partition wall is about 60dB, and 24 brick walls or double-layer 100mm aerated concrete blocks can be used. Double-layer gypsum board (2*12mm) double-row keel, hollow 50mm filled with rock wool, but no sound bridge; All partition walls should be connected to the floor without gaps. At present, many dance halls have poor sound insulation, most of them are because the partition wall is not connected to the floor, and it is considered that a suspended ceiling is sufficient.
The control room is the control center for sound, video and lighting in dance halls and private rooms. Due to the increasing complexity and number of equipment, the number of operators is also increasing, so the control room area should not be less than 20 square meters, its location should be in front of the stage, the operator can directly see and hear the stage through the observation window and dance floor performance.
Lighting system
The lighting system consists of power switch cabinet (board), flow tube dimming cabinet (article), dimming console, lighting controller, basic lighting lamps and lanterns, special effect lamps, performance lamps and audio signals. Basic lighting lamps are commonly used incandescent lamps (mostly downlights), fluorescent lamps, tubes, gas lamps, halogen lamps, neon and candlelight, etc., which form an overall style with the interior design. Effect lamp lamp jujube is a kind of lamp with rotating lamp body. The movement of light column and light spot can produce strong dynamic feeling. Such lamps include universe lamp, multi-head shell lamp, multi-layer turning lamp, multi-directional flying butterfly lamp, lotus lamp, etc. The second category is the light source reflector movement of the lamps, most of which can be voice-controlled, the light spot jump or rotation can be consistent with the rhythm of the music of the rhyme to produce artistic effects and atmosphere. This kind of lamp has the laser magic light scanning lamp, the devil lamp, the sky star, the moon star lamp and some effect lamps composed of single light source and multi-reflector. Special effect lamps and lanterns such as strobe lights, ultraviolet lights, laser effect lights, computer lights, music fountains and so on. Can increase the special, gorgeous charming effect. Lighting fixtures for performance are used for stage performance. Their requirements are the same as those for theater stage. They should have appropriate amount of surface light, side light, top light and return light. Small and medium-sized downlights, spotlights, spotlights, soft lights and chase lights can be used. It is required that the lamps should be symmetrically distributed and the light spots can cover the dance floor. The color change and dynamic of the light is for music, dance service, for the style and artistic effect of the overall service of the dance hall. Various lamp groups should meet the requirements of fast and slow rhythm of multiple types of music, each piece (each dance step) must have 1 to 3 kinds of effect lights or special effect lamps to produce 1 to 3 kinds of harmonious changes and movements. Its rhythm and tone should be in harmony with the connotation of the piece. Strobe lights for disco dance, each time should not be more than 2 music; UV tube should be intermittent opening and closing, in the irradiation intensity to meet the standard under the premise of irradiation time should not exceed 1 hour per night. Illumination requirements: performance area is greater than 100Lux, spontaneous area is greater than 20Lux, viewing rest area is greater than 5Lux, various channels are greater than 10Lux, which can be dimmed in actual use, dance floor (self-entertainment area) is greater than 6Lux, other areas are not less than 6Lux, and packing boxes are not less than 3Lux. The strobe frequency of the strobe light should be within 6Hz, and the laser should not be directed to the human body, especially the eyes.
acoustic system
The acoustic system of the dance hall is composed of the sound field where the microphone (natural sound source) is located, the sound field of the speaker and the sound reinforcement equipment. The quality of the sound reinforcement field is directly related to the quality of the frequency characteristics of the sound heard, the uniformity of the sound field distribution and the sound interference and other acoustic characteristic indicators. The greatest influence of the sound field will cause acoustic feedback (howling) and seriously reduce the sound transmission gain. The two sound fields are formed by architectural acoustics and decoration engineering, that is, determined by interior design, therefore, the interior design of the dance hall should fully express its particularity and function. Good and reasonable architectural acoustic design is the basic connotation of the interior design of the song and dance hall, and it is also the basic guarantee for the sound reinforcement system of the song and dance hall. Therefore, the design and construction of song and dance halls (including indoor construction and decoration, sound reinforcement system and lighting system) should not be handed over to some units or individuals that do not have technical strength and scientific means to design and construct.
composition of sound reinforcement equipment:
1: high-grade microphone microphone can be used for performance, medium or low-grade can be used for karaoke. A condenser microphone may be used for a band or a violin, piano, or drum set instrument of a band. In order to reduce the trouble caused by the cable can use wireless microphone. It is a moving-coil microphone plus a emitter, and a pocket-sized microphone plus a emitter, which is mostly a standing pole microphone. Its technical index is slightly lower than that of the same grade of wired fax machine.
2: The main function of the mixer is to mix and process the audio signals from various sound sources (microphone, CD player, LD recording base, etc.), various electro-acoustic instruments (electronic organ, synthesizer, electric guitar, bass guitar, etc.) and various peripheral equipment as required. The sound signals are modified and compensated to some extent. According to the requirements, the sound signals are divided into multiple groups of output. In general, song and dance halls can use 8~16 channels of mixer, and those with bands can choose more channels. The technical specifications and debugging of the mixer are directly related to the quality of the sound and the noise of the system.
3: The equalizer is used to correct the defects of the frequency transmission characteristics caused by the uneven resonance characteristics of the room itself and the frequency distortion generated by the sound reinforcement equipment (mainly speakers, microphones, etc.), modify the timbre of musical instruments and actors, and improve the effect of artistic performance. Analog equalizer is composed of analog circuits (amplifiers), mostly graphical, mostly as room compensation, and generally only one-time adjustment. Digital equalizers use computer technology, which can predict and store multiple equalization curves for spectrum dynamic display. They are mostly used by performing groups that modify timbre or move places, so dance halls do not use them.
4: Compression/limiter should be used in larger and important ballrooms, especially discos, so that the system is not overloaded and does not produce excessive distortion.
5: The effect device jujube can make up for the lack of indoor natural reverberation, modify the tone and create special effects. The multi-function effect device can store a large number of sound processing programs, and perform comprehensive processing of sound signals such as delay, reverberation, echo, chorus, duet, excitation, equalization, and redistribution of left and right channels. Reverberator, time delay is also a kind of effect.
6: Sound exciter It is a sound processing device that generates high harmonics based on the fundamental frequency of the fundamental tone. In the voice of the chaotic place can greatly improve the sound of the penetrating power, in the singer singing or playing tapes can increase the effect, playing CD can not, in serious music venues are prohibited.
7: Electronic frequency divider When the requirements of the sound reinforcement system are relatively high, the full-band speaker box (combined speaker box) is generally not used, but the electronic frequency divider is used to divide the sound signal and send it to the high, medium and low power amplifiers respectively, and then the high, medium and low speaker boxes are respectively pushed to sound (sometimes divided into high [medium] and low frequency bands.
8: The power amplifier directly pushes the speaker by amplifying the voltage and current (power) of the weak electrical signal. Because it is a high-power output device and the load is an inductance-based speaker, improper use is easy to fail. In order to ensure the same belief in sound reinforcement, the main power amplifier is best to use the same brand, and it should not be close to the recording stand to avoid electromagnetic interference.
9: The speaker is the last important part of the sound reinforcement equipment. It restores the electric power signal to the sound signal, so it is also a key link. The full frequency band (from bass to treble) used in the dance hall is a 2. three-way combination speaker box. When the impedance is consistent, the rated power of the general power amplifier can be selected to be 1.5 to 2 times the rated power of the speaker, and the main speaker box should also be selected with the same brand to avoid sound and image confusion.
Previous Page
More Cases