The most important thing in the decoration design of the auditorium is the stage lighting design. Not only must the stage lighting design be gorgeous, but also the stage lighting design must meet the fire safety standards. What I want to share with you in the lighting design knowledge today is about the fire safety issues in the basic light source design in the stage lighting design.
When constructing and hoisting temporary light stands during the stage decoration design of the performing arts hall, the building commissioning department should be approved in advance for the load capacity and installation method of the load-bearing components. The towering floor lamp holder should have measures to prevent the center of gravity of the lamp holder from falling to the side where the lamp is installed and the side of the standing operator.

The lighting on the stage of the performing arts hall should be installed on a base that is not easy to ignite. It should also be noted that the distance from the combustible textile such as curtains should be more than half a meter, and the distance between the front of the lighting should be more than 1.5 meters. In addition, it must be fully estimated that the spacing is affected by factors such as curtain lifting, opening and closing, movement of lamps and swing caused by natural airflow, and thermal insulation measures should be taken if the safe spacing cannot be met. If the big screen is close to the column light, a fixed metal bracket or net cover should be set to block the big screen from getting close to the lamp.

When designing the entire stage decoration, avoid hanging flags, launching ribbons, flying balloons and setting up other moving objects in the air in the lighting decoration area to prevent these objects from directly contacting high-temperature lamps, entanglement, collision and fire.

If there are flammable items under the lighting in the stage lighting design of the auditorium, lead wire protective nets or baffles made of non-combustible materials should be installed on the front of the lamp and the heat dissipation holes to reduce the hazards caused by glass fragments and hot filament splashing caused by the burst of the lamp .

In summary, the five contents that everyone has seen are the issues that are worth considering for fire safety in our stage lighting design. Only the stage lighting of the performance hall with gorgeous design and safety can be welcomed by everyone.