Overview:

Taking advancement, reliability and rationality as the design ideas, and fully considering the application requirements of all aspects of the venue and the future development prospects, the design scheme of the lighting and sound system with the highest cost-effectiveness is proposed.

According to the indoor dimensions provided by the architectural drawings, the standard design system software is used to design the lighting system to ensure that the lighting system has good technical indicators.

1. Design the venue

Shake slowly

2. Design function

Slowly shake the lighting system to meet the use of singing and dancing, cultural and entertainment activities.

3. Design basis

(1) Relevant information provided by you

(2) The design and use function requirements provided by you

Four, safety regulations

The lighting system standards prescribed by the state and related personal safety and fire-fighting regulations, the voltage used, the installation of the power box or box, the selection of cables, and the passage of pipes should also comply with the personal safety regulations. The power supply and equipment installation in this system are also in compliance with fire-related regulations.

Five, design content

Lighting system

The engineering design plan mainly considers the reliability, advancement, applicability, rationality, and after-sales service of the system and equipment configuration. We have considered several points in the selection of equipment:

(1) Computer lighting equipment equipped with high-performance indicators can reduce the total power consumption of lights, reduce the number of lamps, and avoid waste of funds and space.

(2) The color change and dynamic change of the lighting pattern are mainly to serve music and dance, and to meet the needs of performances and various cultural and entertainment activities. Therefore, the selection of lamps is mainly characterized by many patterns, large color changes, and strong dynamics; the use of lighting effect atmosphere to set off the concept of musical expression, creating a beautiful scene effect. Use moving head computer lights, dye lights, and laser lights to be installed in several levels in different combinations to form a three-dimensional light effect. Variations in patterns will enhance the sense of beauty, and changes in color will arouse passion and leave unforgettable memories.
To
(3) Lightweight, small size, low motor noise, good heat dissipation, high luminous efficiency, and reliable performance are selected. The lamp accepts the international standard DMX512 signal control, suitable for any DMX communication protocol console.
To
Pay attention to process design, forward-looking planning and the investment focus of the project, realize intelligent lighting, digital equipment selection, professional and diversified lighting programming, standardized and standardized construction management, and strictly implement national standards on the premise of meeting the requirements of use Carry out the design to make the quality of the lighting project reach the desired effect. The design plan mainly considers the reliability, advancement and rationality of the system configuration.

A. Reliability of system configuration: In order to ensure the reliability of the lighting system, select lighting equipment with reliable quality.
B. The advanced nature of the system configuration: In the design of the lighting system, the needs of the continuous development and upgrading of the lighting technology in the future and the scalability and compatibility of the system are fully considered, so as to meet the user's future lighting expansion and expansion due to the increase in scale and other reasons. The need for technological upgrading. ...
C. The scientificity and rationality of the system configuration: Whether the lighting system design is scientific, reasonable and practical, and meets the user's requirements to the greatest extent.

Light composition:

(1) Configure 12 1200W moving head computer lights, 8 moving head dyeing lights, and 8 laser lights as special effect lights. Moving head computer lights and laser lights are used together to create a dynamic effect on the stage. Color and pattern matching create a warm and cheerful atmosphere. Through computer light console programming, control the color, pattern and movement of the computer light; under the flexible use of the lighting engineer, it can follow the rhythm of the music to achieve synchronous action, so that the guests can be promoted to a higher aesthetic and artistic realm. In a passionate atmosphere full of cold sadness or joy and joy. With the strength of the music rhythm, the lighting engineer uses the brightness, color, distribution and movement of the light to play the inner mood of the light, and constantly updates various light combinations, patterns and colors, so that the light and the music content are in harmony. The laser light can produce vivid and gorgeous effects.
To
(2) In order to enhance the stage lighting effects to meet various performance processing methods, 4 sets of smoke machines are specially equipped. These devices are used on the stage. When dancing slowly, the dancers are as light and misty as clouds and mist, blending the scenes, and very affectionate. During the dance, the smoke from the lower body of the dancer is in sharp contrast with the strong twisting of the upper body. It is a beautiful scenery line, which can vividly depict the special effects of the fairyland resort.

Six, construction and installation
To
Preparation for construction and installation: The auxiliary materials used for installation, such as wires, signal wires, connectors, conduits, trunkings, and even solder, meet the relevant national safety and technical standards; construct in strict accordance with the relevant national construction regulations, and strictly control safety, fire prevention and theft;

Construction and installation quality control: Concealed works are carefully done without leaving hidden dangers; fire prevention measures are strictly adopted; the welding is firm and the insulation is in place; the system has high reliability, easy maintenance, and no electrical noise. To

Construction and installation file management: complete product manuals; complete and accurate technical design drawings and materials; wiring is marked and easy to repair; make construction logs, and make handover memos with Party A and decoration.

Commissioning and acceptance: The installation and commissioning shall be carried out in strict accordance with the design requirements, and the acceptance shall be carried out according to the relevant technical standards.

Seven, construction specifications

(1) GBJ232-82 "Standard Specification for Construction and Acceptance of Electrical Installation Engineering"
(2) GBJ300-8 "Uniform Standard for Quality Inspection and Evaluation of Construction and Installation Engineering"
(3) GB/T14076-1993 "General Technical Requirements for Film and TV Stage Lighting"
(4) JGJ-T16-92 "Code for Electrical Design of Civil Buildings"